Idiomas disponibles
Idiomas disponibles
■
High power operation
High power (Hi POWER)
The Hi POWER (high power operation) mode
automatically controls room temperature, fan speed
and operation mode so that the room is quickly cooled
Setting Hi POWER mode
1
Hi POWER button
Press the Hi POWER button after starting any
operation. At the same time, the "Hi POWER"
mark on the remote controller is indicated.
Cancelling Hi POWER mode
1
Hi POWER button
Press the Hi POWER button once again.
At the same time, the "Hi POWER" mark on the
remote controller goes out.
CAUTION
The Hi POWER mode cannot be activated in the
●
DRY and FAN ONLY operation and when the ON
TIMER operation is reserved.
Hi POWER mode is not available for group control.
●
When Hi POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi POWER mode will not be performed. Please
cancel the Hi POWER mode.
9-EN
SWING
FAN
FIX
QUIET
Hi POWER
■
Preset operation
Set your preferred operation mode for future use.
The setting is memorized by the unit for future
operation (except airflow direction).
Set your preferred operation.
1
Press the PRESET button for 3 seconds
to memorize the setting.
The
mark is displayed.
When you press this button next time, the
memorized operation mode will be enabled.
– 9 –
