Kenwood TK-270G Manual De Instrucciones página 22

m Storing DIMF Numbers
Note: Auto Dialling must first be activated by your dealer.
You can store DTMF numbers (16 digits maximum)
in each of the 9 Auto Dial memory locations (1 ~ 9).
1 Press the # key.
e "D" appears on the display.
2 Enter the desired digits on the keypad.
¢ You can enter the digits 0 ~ 9, A~D, * , and #.
(A ~ D may be disabled by your dealer, however
you can still enter them if desired.) When entering
"#", you must first press the PTT switch.
¢« To cancel, press O, @, <, or >.
3 Press the # key, then enter a single digit number
(1 ~ 9) for the memory location.
e The original display is restored.
m@ Confirming Stored DIMF Numbers
To confirm the numbers stored in memory locations:
1 Press the * key.
e "A" appears on the display.
2 Enter the desired memory location number (1 ~ 9).
e The stored digits are displayed. |
¢ |f programmed by your dealer, no DTMF tone will
sound when "D" is transmitted. "D" is used for a
pause time. The pause duration is programmed by
your dealer.
3 Press any key other than the PTT switch to exit.