Idiomas disponibles
Idiomas disponibles
ENGLISH
6.6
Lubrication
The working life of the mechanism will be enhanced
and service problems will be reduced if you follow
a regular lubrication schedule. Never over-grease;
excessive lubrication will collect dirt and can
Table 1. Parts Lubrication Requirements
Part
A
Opposite End Bearing #130097
B
Motor Side End Hub #180349
C
Rope Reels #181165
D
Double Dog #181167 &
#181174
E
Toggle Switch Cover Lock
F
Motor
G
Hydraulic Tank Fluid*
HYDRAULIC DRIVE*: Hydraulic tank, motor, and lines should be drained, flushed and refilled once per year.
IMPORTANT: Clean and dry the parts before applying lubrication (e.g. using high-pressure water and/or
compressed air).
PARTS LUBRICATION REQUIREMENTS
F
G
* For systems with a hydraulic drive
* For systems with a hydraulic drive
Figure 4.
Parts Requiring Lubrication (See Table 1)
Page 10
Waterproof lithium type grease (Lubriplate
Waterproof lithium type grease (Lubriplate
NOTE: Cover the pool completely.
Waterproof lithium type grease (Lubriplate
NOTE: Uncover the pool completely and rotate rope
reels.
WD-40
, Motor oil 30w, or similar
®
NOTE: You may need to undo the strap around the
double dog.
Graphite lock lube
Does not require lubrication
Automatic transmission fluid (ATF)
Type "F" or "Dextron III
B
C
D
Cover-Pools
T3 Evo
®
possibly get on the vinyl cover or webbing. Grease
on the vinyl or webbing can cause deterioration.
Do not grease or put silicone on the rope, webbing,
or tracks; this will cause rapid deterioration of the
threads, fabric, and track.
Lubrication
#1200-2)
®
#1200-2)
®
#1200-2)
®
"
®
A
Automatic Pool Cover | Owner's Manual
™
Frequency
Twice per season
Twice per season
Twice per season
Twice per season
Twice per year
N/A
Check twice per
season
E
