REMOTE CONTROL VIEW
1. Please use a Lithium battery CR2025 3V.
2.The remote-control power button is labeled as such
1.'
2.'24H' Timer setting from 1–24 hours
3.'MODE' COLD, HOT 2 settings for selection
4.'Swing' Louver swing up and down
5.'LOCK' Child-Lock function for heater.
6.'AUTO' Window Open Function
7.'Delay' Adjust temperature
8.'W.Timer' Set the timer of one week
9.'+' Increase
10.'-' Decrease
11.'Set' Set real time
PS: After the appliance is started, if the heating function is not activated, it will shut down directly. The product will
not enter the 30-second standby shutdown process but will transition directly to the standby state.
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance automatically in case of
overheating. For example: due to the total or partial obstruction of the vents. In this case, unplug the appliance,
wait about 30 seconds for it to cool and remove the object which is obstructing the vents. Then switch it back on
as described above. The appliance should now operate normally. If the problem persists, please contact
Customer Service for assistance.
CLEANING AND MAINTENANCE
•
Before undertaking any cleaning or maintenance on the appliance, disconnect it from the power supply.
•
For cleaning, it is recommended to use a soft, damp cloth and a neutral cleaning product. Do not use an
abrasive cloth or devices which could affect the appearance of the appliance. Check that the hot air outlet
and the ventilation inlet are free of dust and dirt.
During cleaning, be careful not to touch the heating elements.
•
To open the filter at the back for cleaning, press the top of the plastic cover at the rear.
•
In case of malfunction or failure of the appliance, unplug it from the power supply and contact an authorised
repair technician.
NOTE: As a result of continual improvements, the design and specifications of the product within may differ
slightly to the unit illustrated on the packaging.
"Main power button
.
EN