SANNOVER CHAUFFAGE OTELYA LUXE Manual De Instrucciones página 13

Termoventilador eléctrico
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
2) Use
1.
Turn on the heater by pressing the ON/OFF button on the remote control.
2.
By pressing the 'MODE' button on the remote control, the appliance will blow hot air and
3. By pressing the 'MODE' button twice on the remote control, the appliance will blow hot air and
up.
By pressing the 'MODE' button three times on the remote control, the appliance will blow cold air.
3) 24-hour Timer function
1. Enable this function using the "
2. Press the '
' button, set the timer up to 24 hours, keep the '
00--24 (00=close, 01=1hour, 02=2 hours...24=24 hours etc.) and the '
PS: setting to '00' means no timer is set, and the '
4) Thermostat
1. This function is accessible only via the remote control.
2. To adjust the temperature, press the '
3. When the air temperature drops 2 degrees below the set temperature, the appliance will start heating with 'I/W'
(1000 W).
4. When the air temperature drops 4 degrees below the set temperature, the appliance will start heating with 'II/H'
(2000 W).
5. When the air temperature is 1 degree higher or ≤ the set temperature, the appliance will blow cold air.
5) Weekly Timer FUNCTION
1. This function is accessible only via the remote control.
2. WEEK Press the '
HOUR Press the '
' button 2 times, the LED display will flash '00',
press both '
' buttons to set the hours from 01 to 00 (01=1 hour, 02=2 hours... 00=24 hours, etc.).
Press the '
' button 3 times, the back LED display will flash '00', press both '
between 00 and 59 (01=1 minute, 02=2 minutes, etc.).
The '
' light on indicates operating time.
Press the
'' button 4 times, the front LED display flashes '00',
press both '
' buttons to set the hours from 01 to 00 (01=1 hour, 02=2 hours... 00=24 hours, etc.).
Press the '
' button 5 times, the back LED display will flash '00', press both '
between 00 and 59 (01=1 minute, 02=2 minutes, etc.).
The '
' light on indicates off mode.
The above is set on Monday's timer.
3. Press the '
' button once more, the '
operation with the start time HOUR/MINUTE and the stop time HOUR/MINUTE are all the same as for Monday.
4. Once all daily settings are programmed, and all settings are complete, press the '
control 7 times to set the temperature from Monday to Sunday, and press both '
" button on the remote control.
' button to set the desired temperature between 10°C and 49°C.
st
' button a 1
time, and the '
' button pressed to increase the hours from
' light will come on.
' light will be off.
' light comes on, meaning 'Monday'.
' light comes on, meaning 'Tuesday'. Please note that the
EN
will light up.
will light
' buttons to set the minutes
' buttons to set the minutes
' button on the remote
' buttons to select the
loading