Idiomas disponibles
Idiomas disponibles
fixing holes. Drill two holes on the wall, 2 metres above the ground and near the corner, with a diameter matching
that of the dowel, ensuring it's at least 25 mm. Insert two screws, making sure the heads of the screws protrude by
10mm, and position the appliance.
Make sure that it is securely fitted to the wall.
330
OPERATION INSTRUCTION
1. Before inserting the plug into a power outlet, ensure that the electrical supply in your region matches the rating
label on the appliance.
2. Carefully remove the appliance from the plastic bag and box.
3. Place it on a firm level surface, setting the master button to '-' position. Plug the power cord into an
AC220-240V power outlet. The appliance will produce a sound, and the 'Power' indicator light will turn on.
1) Heating programme
Set time
Turn on the heater. to set the time press the "
LED display will show 00:00 and the 'Mo' light will be on.
Press the 'Set' button once on the CLOCK, the LED display '00' flashes, press "
set the Hours from 01-00 (01=1 hour, 02 = 2 hours ... 00 = 24 hours, etc.)
Press the 'Set' button again, the LED display flashes '00', press "
minutes between 00--59 (01=1 Minute, 02=2 Minutes etc.).
Press the 'Set' button again for the WEEK, 'Mo' flashes, press "
between Mon-Sun (Mon=Monday...Su=Sunday etc.).
PS: Press the 'Set' button, the screen will flash for 5 seconds. You have 5 seconds to make the modification,
otherwise, the appliance will go back to standby mode.
(The appliance will maintain the correct time until power is turned off)
" button on the remote control. The control panel will light up, the
" one of the two buttons to
" one of the two buttons to set the
" one of the two buttons to set the week
EN
