Idiomas disponibles
Idiomas disponibles
In 2.4G mode, if the distance between the earphones and the transmitter exceeds the pairing distance of
2.4G, the SIGNAL indicator will enter the reconnection state with the white light flashing slowly (0.5s on/0.5s
off), and the headphones will automatically shut down after 5 minutes of no operation. ( Announces Power
off when shutting down).
In Bluetooth mode, after the headphones exceed the pairing distance with a Bluetooth terminal such as a
mobile phone, the SIGNAL indicator will flash blue light slowly (0.5s on/0.5s off) to enter the alternate state
of reconnection and pairing, and the headphones will automatically shut down after 5 minutes of no
operation. ( Announces Power off when shutting down).
Low Battery Shutdown
When the battery voltage of the headphones is less than 2.2V, the SIGNAL indicator enters the state of red
light flashing slowly (0.5s on/0.5s off), and the headphones will automatically shut down after 5 minutes of
no operation. ( Announces Power off when shutting down).
At the same time, the headphones in the low battery state will emit a "BE" sound every minute until the
earphones are automatically turned off.
Play Music
Play/Pause: Short press the power button
Next song: Press the volume + button 1S
Previous song: Press volume- button 1S
Volume +: Short press the volume + button to increase the volume step by step (When the volume level
reaches the maximum, the headphones will announce "Maximum volume")
Volume-: Short press the volume- button to reduce the volume step by step (When the volume level
reaches the maximum, the headphones will announce "Maximum volume")
Voice Assistant (BT)
Double-click the power button to turn on SIRI of the phone (provided that the headphones has been
connected to the phone via Bluetooth), and double-click the power button again to turn off SIRI.
BT Mode
Please confirm that the headphones have been connected to the transmitter/TV through 2.4G mode, and
connected to the mobile phone through Bluetooth mode first.
If the mobile phone suddenly receives a call when you are listening to TV programs with headphones, the
headphones will automatically exit 2.4G mode, switch to Bluetooth mode, and automatically enter 2.4G TV
mode after the call is hung up.
When the earphone receive an incoming call through Bluetooth mode, the earphone will play the incoming
call music of the mobile phone, and the SIGNAL indicator will also be steady blue light. If you want to
answer/hang up the call, short press the power button of the headphones. If you want to reject the incoming
call, you need to press and hold the power button of the headphones for 2S.
If you have already used the mobile phone to perform a dial-up call operation, and want to cancel the call at
this time, you need to short press the power button of the headphones to cancel the dial-up operation.
Headphones Charging
After confirming that the battery in the headphones is a rechargeable Ni-MH battery, you can use the
charging function.
Put the headphones on the transmitter to charge (the transmitter should be connected to the power supply),
the CHARGE indicator on the transmitter will flash green light slowly (1S ON / 1S OFF); when the earphone
is fully charged, the green light of the CHARGE indicator on the transmitter will always be on.
Remarks: When using the charging function, please make sure to use a rechargeable Ni-MH AAA battery;
when the battery is fully charged, please remove the headphones from the transmitter or power off the
transmitter.
05
