Idiomas disponibles
Idiomas disponibles
Product Features
Support uncompressed 2-channel LPCM digital audio signal output;
Supports 24-bit S/PDIF input bit stream on R/L channel;
Supports sampling rates of 32, 44.1, 48 and 96192KHz
Provide electromagnetic noise-free transmission;
If you use a TV as the audio source, please don't forget to set the TV audio output to PCM/LPCM (Steps
Device Homepage - System Settings - Image and Sound - Voice Settings - Digital Audio Output -
PCM/LPCM); (for example, use Panasonic TV as audio resources, please set the TV audio output to SPDIF
output; use a Samsung TV as a speaker, please turn on its external speakers (steps: menu-sound-speaker
settings-external speakers-on)
Other audio accessories
Power Adapter
RCA lotus head adapter cable
3.5mm audio conversion cable
Instructions
Before official use, please prepare according to the following requirements:
1. Connect the power adapter cable to the transmitter, and at the same time, use the audio cable to connect
the TV and the transmitter together; and confirm that the TV can be viewed correctly;
2. The headphones are powered by two AAA batteries, and the batteries must be fully charged (you can
observe through the "power" indicator light on the headphones shell).
Transmitter
Power on/off
After the adapter of the transmitter is powered on, the transmitter automatically enters the power-on state;
when the power adapter is unplugged, the transmitter enters the power-off state.
The SIGNAL indicator lights up white and flashes quickly for 5 seconds (0.25s on/0.25s off) when the device
is turned on; the SIGNAL indicator does not respond when the device is turned off.
Pairing State
In 2.4G mode, press and hold the headphones "2.4G/Bluetooth switch button" for 5s to enter the pairing
state. At this time, the SIGNAL signal light of the headphones enters the state of white light flashing quickly
(0.25s on/0.25s off); at this time, connect to the power adapter cable of the transmitter to the power supply.
If the pairing is successful, the SIGNAL indicator of the transmitter will always be white, and the SIGNAL
indicator of the headphones will also be always white (the headphones will broadcast TV Connected). If the
pairing fails, the SIGNAL will not stay on white.
Short press the "2.4G/Bluetooth mode switching button" to put the headphones into Bluetooth mode --
SIGNAL enters the blue light flashing slowly (0.5s on/0.5s off), and the headphones broadcasts "Bluetooth
Headphones". At this time, under the Bluetooth function of the mobile phone, search for the list of
connectable devices - select "RETEKESS TA007" to complete the Bluetooth pairing (Bluetooth connected
will be broadcast if the pairing is successful).
Audio Input
After connecting the TV to the transmitter with the audio cable, the SIGNAL indicator of the transmitter is
always white;
At this time, after unplugging the audio cable of the transmitter, the SIGNAL indicator light will be on in white
for 1min, and then the white light will flash slowly (0.5s on/0.5s off); after there is no audio input for 4min,
the white light will turn off and enter the standby state ( When there is an audio signal input again, the
transmitter is reactivated, and SIGNAL enters the white light state).
03
