cecotec ENERGYSILENCE 790 SKYLINE CONTROL Manual De Instrucciones página 41

3. ASSEMBLY
Fig. 3 key:
1. Base half 1
2. Base half 2
3. Locking screws
Warning:
The fan can only be used if both base halves are mounted.
Make sure the appliance is disconnected from the mains before installation.
Fig. 3
1. Place base half 1 on the fan body.
2. Place base half 2.
3. Make sure to secure both halves securely with the four screws provided.
NOTE: there are 2 holes in the base, the 2 brackets of the fan body have to pass through them
when mounting the base. Fig. 4
4. OPERATION
Press the power button to switch on the fan. Then, press the speed button to select the desired
speed:
- : low speed.
- : medium speed.
- : high speed.
Press the oscillation button to activate the oscillation mode (from right to left).
Press the timer button to set the timer, you can choose between 1 and 2 hours. When you have
selected the time, the corresponding indicator light will light up. The fan will switch off once
the selected time has elapsed.
Note: each time you press a button, the fan will beep, and the corresponding indicator light
will light up.
If you are not going to use the fan for a long period of time, disconnect it from the mains.
Remote control
The functions can be activated identically, either via the remote control or via the built-in
control panel.
ENERGYSILENCE 790 SKYLINE CONTROL
ENGLISH
41