Worx Nitro WX842 Serie Manual Original página 14

8. TROUBLESHOOTING
Tool does not operate properly:
Tool operates properly, but
fasteners do not drive fully
Tool operates properly, but
fasteners are driven too deep
Frequent empty nailing
Tool jams frequently
14
9. DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
Declare that the product
Description
Type
Function
Complies with the following Directives:
Standards conform to
EN 60745-1, EN 60745-2-16, EN IEC 55014-1, EN
IEC 55014-2, EN IEC 63000
20V Cordless 18 Gauge Brad Nailer
No nails
Battery is low
Tool is hot
Depth of drive isn't deep enough
Nail is too long for wood
hardness
Depth of drive is too deep
Jammed nails or damaged
nails
Incorrect nails
Damaged nails
Dirty magazine
Allen Ding
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
Replenish nails
Charge the battery pack
Wait until the tool cools down
Adjust depth of drive
Use nail length that is appropriate for
wood
Adjust depth of drive
Pull up on the tool free jam release
and unhook the latch. Check whether
there are jammed nails or damaged
nails inside. If so, remove the jammed
nails or damaged nails in time.
Verify that nails are the correct size
Replace nails
Clean magazine
EN