Idiomas disponibles
Idiomas disponibles
ENGLISH
3. OPERATION
1.
Fill the measuring spoon with a maximum of 80 g of corn.
2. Remove the top cover.
3. Pour the corn kernels into the corn container.
4. Put the cover on top.
5. Plug the device into a power supply.
6. Switch on the device by pressing the on/off switch. The device will start making popcorn.
Warning
-
Do not put salt, sugar, oil, butter, or any other food other than corn kernels into the device.
Doing s omay cause irreparable damage to the product or impair its operation. If you wish
to add salt, do it in a separate container.
-
Do not use the device without the cover on. Do not remove the cover during operation.
-
When the popcorn is ready, switch off, unplug the device from the mains, and let it cool
down completely.
-
Once cooled down, remove any remaining corn kernels from the corn container.
Note
-
It is important to empty the remaining corn kernels from inside the device before using it
again to ensure proper operation.
-
Allow the machine to cool down for at least 10 minutes between uses.
Recommendation
For better results, use fresh corn kernels. Once the pack of corn kernels has been opened, it
should be stored in an airtight container in the refrigerator.
4. CLEANING AND MAINTENANCE
-
Turn off, unplug the appliance, and let it cool down before cleaning it.
-
Use a soft, damp cloth to clean the outer surface of the product and wipe it dry with a dry
cloth or paper towel. Do not use abrasive detergents, steel wool, or scouring pads.
-
Wipe the inside of the corn container with a dry cloth. Make sure no liquid enters the cavity
of the appliance to prevent damaging it.
-
All removable parts of the product should be cleaned regularly with hot soapy water (top
cover, popcorn container, and measuring spoon). Allow them to dry completely before
reinstalling.
-
The top cover, popcorn container, and measuring spoon are dishwasher safe.
36
FUN&TASTE P'CORN EASY
