cecotec CONGA 999 MAP GENESIS Manual De Instrucciones página 29

ENGLISH
8. Start/Pause
9. Spiral mode
10. Back Home
Note:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This robot vacuum cleaner includes a package designed to protect it during transport.
Take the robot vacuum cleaner out of the box. Keep the original box and other elements
in a safe place, as this will help you prevent damage to the robot vacuum cleaner when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content. Fig. 1.4:
Robot vacuum cleaner
1.
2. Charging base
3. Charger
4. Mop and mop bracket
Water tank
5.
6. Dust tank
7. Self-cleaning brush
8. 2 side brushes
Remote control
9.
10. AAA batteries
11. Instruction manual
Warnings
- Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
curtains, or other fragile objects which may block or slow down the operation of the robot
vacuum cleaner. Fig. 2
If the room to be cleaned is near a balcony or stairs, a physical barrier must be placed to
-
prevent damage to the robot vacuum cleaner and ensure safe operation. Fig. 3
- Direct exposure to sunlight or heavy light contrasts may affect the correct operation of the
sensors. If this happens, the robot vacuum cleaner will cease operation. Move it to a new
56
CONGA 999 MAP GENESIS
location for it to start running again.
- Do not use the robot vacuum cleaner for liquids.
3. INSTALLATION
1. Place the charging base against a wall and leave a minimum free space of 1.5 metres to
the front and 0.5 metres to each side. Fig. 4
2. Connect the charging base to a power socket.
Install both side brushes in their corresponding slots, located on the bottom part of the
3.
robot vacuum cleaner. Press until they click well into place. Fig. 5
4. Place the robot vacuum cleaner in the charging base and make sure the charging terminals
on the robot match those of the base. Once the robot vacuum cleaner is properly placed,
it will beep once, and the indicator light will switch on. If the light is flashing, it means the
battery is not completely charged. To ensure the maximum cleaning time, wait until the
light turns steady, as this will indicate the battery is fully charged and the robot vacuum
cleaner is ready to clean. Fig. 6.
4. OPERATION
Mobile App
1. To use all available functions, it is recommended to control the robot vacuum cleaner via
the app.
Scan the QR code below for more information.
2. Make sure the robot vacuum cleaner is plugged to the electric circuit.
3. Before you start, make sure your smartphone is connected to a working Wi-Fi network.
4. Enter the Wi-Fi password on the smartphone app, tap on "Next", and follow the
instructions shown on the app.
Note
- Due to the improvement and update of the app, operation may differ slightly from the
above description. Follow the instructions shown on the app.
- The robot vacuum cleaner supports only 2.4 GHz Wi-Fi networks, and the Wi-Fi name
cannot contain double quotes.
Start cleaning
- Hold down the Start/Pause button on the robot vacuum cleaner to switch it on.
ENGLISH
57
CONGA 999 MAP GENESIS