Idiomas disponibles
Idiomas disponibles
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
-
Tower fan
-
Screws set
-
Remote control
-
Battery for the remote control (CR2025).
3. OPERATION
1. Connect the fan to the mains. You will hear a beep when you do so. The fan will enter
standby mode.
2. When in standby mode, press
operating at medium speed. "2" will appear on the display.
3. Use the
icon to select speed: low (1) - medium (2) - high (3). Once selected, the
corresponding number will appear on the display, and the corresponding indicator light
will light up.
4. Use the
icon to set the timer. The maximum time you can choose is 12 hours. Each time
you press it, it will increase by one hour. The indicator light of the timer will light up.
5. Use the
icon to activate the oscillation function. When activated, the corresponding
indicator light will light up. Press this icon again to switch off this function.
6. Use the
icon to switch off all indicator lights. If you press it again, the indicator lights will
light up.
7. Once you have set all the functions, the display will automatically show the room
temperature.
Base assembly
1. Fit the protrusions of one half of the base with the holes of the other half. Fig. 5
2. Press the protrusions with your finger until the two parts fit together. Fig. 6.
3. Insert the screws into the holes. Fig. 7
. The fan will start up. By default, the fan will start
ENERGYSILENCE 800 SKYLINE SMART
ENGLISH
43
