Craftsman CMZPWTW18 Manual De Instrucciones página 6

Varilla telescópica
Idiomas disponibles

Idiomas disponibles

English

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
Intended Use
This telescoping wand is intended for cleaning typical house
siding, gutters, and windows.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert
symbols and words to alert you to hazardous situations and
your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.

NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
(Used without word) Indicates a safety related message.
IMPORTANT SAFETY INSTRUCTIONS

DANGER: To reduce the risk of injury, the user must
read and understand this instruction manual as well as
the instruction manual for their pressure washer before
using this product. Failure to follow all warnings and
precautions may result in death, serious personal injury,
or property damage.

WARNING: Risk of Injection or Severe Injury – Keep
Clear of Nozzle – Do Not Direct Discharge Stream
at Persons – This Product Is To Be Used Only By
Trained Operators.
Beware of overhead power lines. Contacting these lines
may result in electrocution, injury, or even death.
Keep at least 30 feet (10 meters) away from power lines.
Do not touch or aim spray at electrical wiring of any kind.
Always operate the telescoping wand from the
ground. Do not stand on ladders, scaffolding, chairs, etc.
Do not overreach. Keep good footing and balance at
all times.
Read all the instructions before using the product.
For use with electric pressure washers only.
Keep children, bystanders and animals away from
the work area a minimum of 30 feet (10 meters) when
operating the telescoping wand.
4
To reduce the risk of injury, close supervision is
necessary when a product is used near children.
Do not operate the product when fatigued or under
the influence of alcohol or drugs.
Keep operating area clear of all persons.
Risk of injection or severe injury. Do not direct spray at
people, pets, or electrical apparatus and wiring.
Do not extend or retract the telescoping pole while
in use.
Know how to stop the product and bleed pressures
quickly. Be thoroughly familiar with the controls.
Stay alert – watch what you are doing.
Disconnect power source prior to the detaching of the
high pressure hose.
Before removing or cleaning accessories and nozzles,
shut down the pressure washer, turn off the water
supply and depressurize the system.
Telescoping wand kicks back – hold with both hands.
To prevent accidental discharge from the gun always
use the trigger lock when you've finished spraying.
Make sure all connections are secure. Hold the gun
securely while starting pressure washer unit.
Risk of explosion. Do not spray flammable liquids.
When using the telescoping wand at any position
less than fully extended, make sure the high pressure
hose is located so that it will not be stepped on,
tripped over, or otherwise subjected to damage or
stress. Keep the hose clear of the working area.
Always wear appropriate safety glasses when
telescoping wand.
Always wear the shoulder harness when operating
the telescoping wand.
For cold water use only.
For outdoor use only - store indoors.
SAVE THESE INSTRUCTIONS
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories. An
accidental start‑up can cause injury.
Assembling Curved Spray Wands and the
T-Shape Brush (Fig. B)
1. To connect the 30° curved rod  
or T-shape brush 
to the telescoping wand 
 18 
threaded end  
of the curved rod/T-shape brush into
 17 
the threaded collar 
 9 
nOTE: Avoid cross threading when installing the curved
rod/T-shape brush. Cross threading will cause leaks.
2. Rotate the threaded collar 
, 120° curved rod  
 19 
 1 
of the telescoping wand 
 1 
 9 
clockwise until fully tightened.
 20 
, insert the
.
loading