Idiomas disponibles
Idiomas disponibles
4.4
Disposal
Electrical appliances in accordance with
Directive 2012/19/EU and batteries/re-
chargeable batteries in accordance with
Directive 2006/66/EC must not be disposed of with
household waste.
Electrical appliances and rechargeable batteries
must be collected separately and taken to a recy-
cling company for environmentally friendly disposal.
If the products contain batteries/rechargeable bat-
teries or illuminants that can be removed from the
old appliance without destroying it, these must be
removed before disposal and disposed of separately
as batteries/rechargeable batteries or illuminants.
Ask the local authorities or your specialist dealer/
manufacturer about recycling centers and collection
points for the proper disposal of electrical waste and
batteries/rechargeable batteries.
5
Maintenance
5.1
Regular servicing and inspection
Regular servicing and inspection of your machine
must be carried out by suitably qualified personnel in
accordance with relevant legislation and regulations.
In particular, electrical tests for earth continuity, in-
sulation resistance, and condition of the flexible cord
should be checked frequently.
In the event of any defect, the machine MUST be
withdrawn from service, completely checked and
repaired by an authorized service technician.
At least once a year, a Berner technician or an in-
structed person must perform a technical inspection
including filters, air tightness and control mecha-
nisms.
5.2
Maintenance
Remove the plug from the socket before performing
maintenance. Before using the machine make sure
that the frequency and voltage shown on the rating
plate correspond with the mains voltage.
The machine is designed for continuous heavy work.
Depending on the number of running hours – the
dust filter should be renewed. Keep the machine
clean with a dry cloth, and a small amount of spray
polish.
During maintenance and cleaning, handle the ma-
chine in such a manner that there is no danger for
maintenance staff or other persons.
In the maintenance area
•
Use filtered compulsory ventilation
•
Wear protective clothing
•
Clean the maintenance area so that no harmful
substances get into the surroundings.
OEL=Occupational Exposure Limit,
1)
Original instruction
During maintenance and repair work all contami-
nated parts that could not be cleaned satisfactorily
must be:
•
Packed in well sealed bags
•
Disposed of in a manner that complies with valid
regulations for such waste removal.
For details of after sales service contact your
dealer or Berner service representative responsible
for your country. See reverse of this document.
Optional accessories / Option depending on model
*)
7
