Parkside PAT 12 B2 Instrucciones De Utilización Y De Seguridad página 40

˜ Charging the battery pack
(Fig. H)
m CAUTION!
Always disconnect the power plug
u
before removing the battery pack
the charger and before connecting it to the
charger.
NOTE
Our battery packs
u
charged. Charge the battery pack
completely before first use.
The battery pack
u
any time as needed without shortening its
service life.
Interrupting the charging process does not
u
damage the battery pack
Never charge the battery pack
u
ambient temperature is below +10 °C or
above +40 °C.
Insert the battery pack
charger .
[ ]
Connect the power plug
socket-outlet.
The charging control LEDs (green
red ) indicate the charging status of the
[ ]
battery pack :
[ 5 ]
LED Status
Red LED lights up Battery pack is charging
Green LED lights up Battery pack fully charged
When the battery pack is fully charged:
Disconnect the power plug
socket-outlet.
Remove the battery pack
charger .
[ ]
38 GB/IE
[ ]
from
5 ] [
are partially
5 ] [
can be charged at
[ 5 ]
.
5 ] [
if the
5 ] [
into the
5 ] [
to a suitable
[ ]
and
[ ]
from the
[ ]
from the
5 ] [
˜ Inserting the battery pack
into the product
(Fig. E)
Align the ribs of the battery pack
[ ]
the battery compartment's slots.
Slide the battery pack completely into
the battery compartment until the battery
latches lock with an audible click into the
[ 4 ]
battery compartment.
˜ Removing the battery pack
from the product
(Fig. F)
Press and hold the battery latches
Pull the battery pack
compartment.
˜ Preparation
m WARNING!
Always remove the battery pack
before filling in or changing nails or
staples.
˜ Choosing the correct length
for nails and staples
Consider 2 factors to choose the correct
length for staples and nails:
– the thickness of the material to be fastened
– the composition and hardness of the base
material
Typical examples
Base Material
material to be
fastened/
thickness
Plywood ≤ 1 mm
Fibre board 1–3 mm
≤ 3 mm
Softwood
(e.g. pine)
3–5 mm 10–14 mm 12–15 mm
with
[ 5 ]
.
[ 4 ]
out of the battery
5 ] [
5 ] [
Staples Nails
6– 8 mm 8–10 mm
8–10 mm 12–14 mm
8–10 mm 10–12 mm