Idiomas disponibles
Idiomas disponibles
Basic Safety Instructions:
WARNING – Maintenance and repair work on pneumatic equipment.
Compressed air can cause severe injury. Observe legal regulations. Take
precautions for persons and environment. Additionally, observe the following:
• Secure machine against unintentional starting and let the machine cool down to
the ambient temperature.
• Protection against tipping, tumbling or falling down when assembling/
disassembling the machine/parts.
CAUTION – Skin exposure to hazardous dusts may cause severe dermatitis.
Dust present at the work place could be disturbed during the maintenance
procedure and inhaled. Clean machine and work place before maintenance work.
WARNING – Danger of explosion! Generation of sparks during maintenance
work!
Observe local safety regulations. Avoid use of force when disassembling and
assembling the machine. Always do maintenance work outside areas which are
not exposed to explosion hazards.
NOTICE – Only use original the manufacturer spare parts, in order to avoid
damages. Otherwise you risk a decrease in machine performance and
an increase in maintenance work. Check the adherence to the technical
specifications according to the operation manual after each maintenance work.
IMPORTANT – There is no warranty for damages and liability is disclaimed, if
non-original spare parts are used.
Maintenance Instruction
Generally, pneumatic machines need little maintenance. If the following rules are observed,
the machine will have the expected long life-time and high reliability. Service life and
performance of the machines are decisively determined by:
- The air purity,
- the lubrication conditions and maintenance,
- the regular control of the compressed air filter, as well as the regular checking of the
machine with regards to external damages.
Disassembly and re-assembly of the machine have to be executed by qualified staff only.
Incorrect assembly can lead to danger of accident for the operator and to defects on the
machine. Additionally, we recommend giving your pneumatic core drill a general overhaul by the
supplier once a year.
50
SERVICE AND MAINTENANCE
PROHIBITION – Eating, drinking and smoking are forbidden during
maintenance and repair work.
