Idiomas disponibles
Idiomas disponibles
Putting on the carrying strap
1. Place the carrying strap (10) on one
shoulder.
2. Adjust the length of the strap so that
the snap hook is approximately 10 cm
below your hip.
3. Attach the snap hook on the eyelet (8)
to insert the carrying strap.
Sliding the eyelet (Fig. D)
Slide the eyelet (8) to better spread the
weight of the device.
1. Loosen the hexagon socket screw (30)
on the eyelet (8).
2. Slide the eyelet to the appropriate pos-
ition.
3. Tighten the hexagon socket screw
again.
Swivelling out the motor
head
Requirements
• Blade encasing attached
• Tubular shaft assembled
• Motor head assembled
• Battery removed.
Swivelling out the motor head
(Fig. C)
1. Press and hold the locking button (3).
2. Turn the motor head (2) into the de-
sired position.
11 positions are possible.
3. Let go of the locking button (3).
4. Check that the motor head (2) is en-
gaged in the selected position.
Extending the tubular shaft
Requirements
• Battery removed.
Extending the tubular shaft
1. Open the lock (5).
2. Pull/Push the extension arm (18) to the
desired length.
3. Close the lock to fix the length.
Charging the battery
See also the charger instruction manual.
Notes
• If warm, allow the battery to cool be-
fore charging.
• Do not expose the battery to direct sun-
light for long periods and do not place
it on a radiator (max. 50°C).
Charging the battery
1. Remove the battery (21) from the
device.
2. Push the battery (21) into the charging
slot of the battery charger (25).
3. Connect the battery charger (25) to a
power outlet.
4. After charging, disconnect the battery
charger (25) from the mains.
5. Pull the battery (21) out of the battery
charger (25).
Checking the battery charge
level
1. Press the button (23) next to the
charge level indicator button (24) on
the battery (21).
The LEDs of the charge level indicator
show how much charge remains in the
battery.
LEDs
red, orange, green Battery charged
red, orange
red
2. Charge the battery (21) when only the
red LED on the charge level indicator
(24) is illuminated.
GB
MT
Meaning
Battery partially
charged
Battery needs to be
charged
35
