Idiomas disponibles
Idiomas disponibles
Extractores de grasa
Method A: Wall mounting
Then use the attached accessories enclosed to turn the screws into the
two holes of inside the hood, and then fix the screws to tighten the hood
onto the wall. Put the one-way valve onto the cooker hood.
Method B: Cabinet
1. Drill 4 holes of 6mm at the bottom of the hanging cupboard.
2. Put the one-way valve on the cooker, hood then install the cooker
hood on the bottom of the cupboard, tighten the hood with
enclosed 4 screws.
3. Install the adjusted board on the bottom of the hood in order to
keep out the gap between hood back and cupboard.
To install into the wall drill 4 holes of 8mm on
a suitable place according with the center
distance of hole in the back of the cooker
hood. Insert the nut into the holes. Insert the
screws into the nuts and tight. Put up the
cooker hood onto the fixed screws.
www.derkochline.com
Range hoods
23
