Fanvil X7 Guia De Inicio Rapido página 5

Device Installation
Please follow the instructions in below picture to install the device.
Bracket desktop installation
Connecting to the device
Please connect power adapter, network, PC, handset, and headset
to the corresponding ports as described in below picture.
➀ USB port: connect USB device (U disk, Wi-Fi dongle)
➁ Power port: connect the power adapter.
➂ Network port: connecting local area network or Internet.
➃ PC port: the network port connect to the computer.
➄ Headset port: connect headset.
➅ Handset port: connect IP Phone handset.
USB
DC 5V Internet
Wi-Fi connect
X7:
1. Plug a Wi-Fi dongle into the USB port （only X7 V2）.
2. Press Menu > Basic > WLAN.
3. Press OK soft key to enter the WLAN open interface. After
opening, press Scan soft key to display the scanned wireless list.
4. Press Enter soft key to enter the available Network, select
the wireless network, press the Connect soft key and enter
the password to connect.
X7A:
1. Click the Wi-Fi icon in the drop-down status bar to turn on Wi-Fi.
2. Press and hold the Wi-Fi icon for 2S , to enter the Wi-Fi
configuration Interface.
3. After opening, it displays the available Wi-Fi list.
4. Select the Wi-Fi you want to connect
5. Enter the appropriate password to connect to the Wi-Fi.
The default is DHCP.
Note: You can contact your service provider for additional settings that may be necessary to con-figure the phone, or download the user
manual and FAQ for more detailed information.
Headset
PC Handset
Phone configuration
Configuration via LCD menu of phone
1. Press Menu > System (default password 123) ;
2. Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE) ;
3. Select Accounts:Confirm > Settings > Confirm, open
registration, fill in: registration address, registration user name,
registration password, SIP user, display name, registration
port, etc.;
4. Save the configuration.
Configuration via web
1. Get the IP address from the phone: Press
Status > ETH IP ;
2. Login: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment (The default
username and password are both 'admin') ;
3. Configure: Select network/account etc, and fill the relevant
content ;
4. Save the configuration.
Language setting
1. Press Menu key > Basic > Language.
2. Select the desired language and press OK soft key.
Making a call
1. Pre-dialing: enter the phone number and pick up the handset.
2. Direct dialing: lift the handset and enter the phone number.
3. Handsfree: enter phone number and press
4. Headset: enter phone number and press
5. Designated line: press line key, enter phone number and
press dial key.
Accepting a call
1. Using the handset: pick up the handset.
2. Using the headset: press
3. Using the handsfree: press
Redial
1. Press key, redial a call number.
- 3 -
key, or Menu >
or vice versa.
or vice versa.
.
.