Airzone AZ BLUE C Serie Manual Del Usuario página 6

Zone navigation
Access to all the
EN
Access to the zone
Zone set-point
temperature
Zone room
temperature
The "All the zones" option allows you to control all the zones at the same time, communicating
the changes to all of them.
Press the name of a zone to control it remotely from the thermostat. When the system detects
a temperature error in a specific zone, the zone displays the error code instead of the room
temperature (see Incidents section).
Remote zone navigation icons:
Return to the zone navigation list.
Return to the main screen.
Operation mode
This is managed from the master thermostat, press to access the selection menu. The available
modes are as follows:
Stop. The HVAC system remains shut down regardless of the status of the rest of the zones.
In addition, all terminal elements (grilles, dampers, etc.) will be closed.
Cooling. In this operation mode, the system only operates with the AC unit in cooling mode
when any of the zones associated to the system is generating demand (set-point temp. < room
temp.).
Heating. In this operation mode, the system only operates with the AC unit in heating mode
when any of the zones associated to the system is generating demand (set-point temp. > room
temp.).
Ventilation. In this operation mode, the system only operates with the AC unit in ventilation
mode when any of the zones associated to the system is ON.
Dry*. In this operation mode, the system only operates with the AC unit in dry mode,
refreshing the environment and prioritizing the operation to reduce humidity, when any of the
zones is generating demand (set-point temp. < room temp.).
*Note: This mode is ideal for days when humidity is high: it reduces the occurrence of water
particles on the grilles.
6
zones
Return to the
main screen
Switch all the
zones on or off
Switch the zone on
or off
Zone
navigation