Donner DST-152 Manual Del Usuario página 11

FIGURE A. CONCAVE "BOW" FIGURE B. CONVEX "HUMP"
3. FRET BUZZ
SITUATION & SOLUTION:
- If your guitar that buzzes at the first five frets will likely need more neck relief. After adjusting the neck relief, then you should also adjust the string
height/action at the bridge.
- If your guitar buzzes in the middle of the neck, you've likely added too much neck relief. After adjusting the neck relief, then you should also adjust
the string height/action at the bridge.
- If the neck relief is properly set, the guitar that buzzes above the 12th fret or across the entire fingerboard will likely need the string height/action
raised.
NOTE:
Avoid momentary over-adjustment, which may cause damage to the neck. It is recommended that the angle of rotation of the wrench is 15
degrees each time. Excessive tuning can also easily cause damage to the neck. Therefore, if you have no experience, it is best to consult an
experienced professional.
9