ACD GRUPPE HasciSE Set Guía Breve página 9

Complies with EN 60825-1:2014
P ≤ 1.0 mW
Laser Radiation: Do not stare into the beam.
ATTENTION
Always switch off the backhand scanner during cleaning. The laser
warning label including laser classification is attached on the back
of the backhand scanner.
Never position the backhand scanner incl. battery in close
proximity to heat sources (heating fans or similar equipment) and
never expose it to direct sunlight, excessive dust sources or
shocks.
ATTENTION
To prevent overheating, the backhand scanner incl. battery,
docking station, and the power supply should not be covered
while they are in operation.
ATTENTION
5.1 Charging the Power Supply Unit for the DSHasciSE & HasciSE
The HasciSE may only be charged in the DSHasciSE with the respective power supply unit.

External power supply unit for DSHasciSE

Input voltage

Output voltage

Power cable (country-specific)
Non-designated use of the interfaces is prohibited.
ATTENTION
Make sure there is no risk of stumbling over connection cables or
power packs.
ATTENTION
HasciSE Set_Brief Overview_Resumen breve_FCC_V1.11
LASER
λ = 650 nm
~
100 – 240 V AC; 1.0 A; 50/60 Hz
15 V DC; 2.4 A
2
Laser beam exit
9 / 54