ACD GRUPPE HasciSE Set Guía Breve página 18

1) A conversion from the suspend time in seconds to the system variable is required here using the
following formula (for the operation, round up a number with one decimal place to the next higher
natural number):
INPUT PARAMETER = ROUND UP( (SUSPEND TIME-1) / 15 )
The input parameter must be inserted in hexadecimal.
The maximum suspend time is 3792 seconds (= approx. 63 minutes)
7.2 Standard Configurations
The following sections present sample codes for changing system parameters to common values. Please
observe the following sequence when configuring the HasciSE and the internal scan module! If this order is
not followed, faulty configurations may occur.
7.2.1 Scanner configuration
The following two configuration barcodes are used to configure the scan module in the HasciSE. They must
be scanned one after the other (follow correct order!) for the scan module to be reset to the factory settings
as a result.
ACD scanner factory settings (first barcode)
The ACD scanner factory settings include the following parameters, among others:

Picklist mode:
7.2.2 Reset to default values
)]{000000002801010000020002FE009DFEFEFEFEFEFEFEFEFEFE
The standard configuration/factory settings include the following parameters:

Scanner:

Proximity sensor:

Suspend time:

Vibration motor:

Loudspeaker:

Switch off via finger switch:

Scan mode:

HID function:

Keyboard version:

Suffix:

Pairing mode:

Belated confirmation signal:
HasciSE Set_Brief Overview_Resumen breve_FCC_V1.11
Deactivated
Factory settings
ACD scanner factory setting
Deactivated
10 minutes
Activated
Activated
Deactivated
Aiming mode
Fast HID
TM
Android
No suffix
App mode 2.0
Signal after barcode was scanned
ACD scanner factory settings (second barcode)
English
18 / 54