Idiomas disponibles
Idiomas disponibles
Function Setting
Air volume button
Press the button "+" on the left side of the remote control to increase the
air volume. Press the button "-" on the left side of the remote control to
decrease the air volume. There are 9 level settings for cool mode. There
are 4 level settings for warm mode.
Warm mode button
Press the warm mode button to enter the warm mode. The digital dis-
play will show the ambient temperature. The temperature display goes
out after approx. 40 seconds. You can adjust the air volume and the
temperature under this mode.* Note: under warm mode, max mode and
sleep mode are not available.
Temperature button
Under warm mode, press the button "+"/"-" on the right side of the re-
mote control to set the temperature between 1-30°C.
Note: buttons do not work under cool mode.
Timer button
Press the timer button to set the working time from 1 to 8 hours. A small
"·" will flash on the lower right corner of the digital display to indicate the
timer is under setting/operation."
* The set temperature should be higher than the ambient temperature so that the warm mode func-
tion will be turned on. When the ambient temperature reaches the set temperature the warm mode
function will stop. The appliance will send out a cool breeze for approx. 40 seconds and then turn
into standby mode. When the ambient temperature is lower than the set temperature the warm mode
function will automatically activate.
Under warm mode, the default set temperature is 25°C. When the ambient temperature is below 0°C
the digital display will only show "01" instead of negative temperature value. After running over 9
hours under the warm mode, the appliance will automatically stop running. Restart by pressing the
on/off button on the control panel or by using the remote control. Note: the temperature can only be
set by the remote control. The control panel does not support this operation.
EN
21
