Idiomas disponibles
Idiomas disponibles
OPERATION
1
Insert the plug into a suitable power outlet. Press the power switch to position "I".
The appliance is in standby mode.
2
To turn on and off: Press the on/off button on the control panel the buzzer will
beep once and the appliance will start running. Press and hold the on/off button
for 2 seconds the buzzer will beep twice and the appliance will stop running after
you release your hand.
3
To switch to the warm mode: The appliance starts working in cool mode by
default; it sends out the cool air. Press the warm mode button on the control
panel to enter the warm mode; the appliance starts sending out the warm air.
The digital display shows the ambient temperature. Press the button again to exit
the warm mode.
4
To set the air volume: When the appliance is in operation press the on/off button
on the control panel to adjust the air volume from 1 to 9 under cool mode; adjust
the air volume from 1 to 4 under warm mode.
5
To set the oscillation function: Press and hold the on/off buton on the control
panel for 1 second the buzzer will beep once and the appliance will start oscil-
lating. Press and hold the on/off button for 1 second again the buzzer will beep
once and the appliance will stop oscillating."
TO USE THE REMOTE
CONTROL
This unit has a remote control. Please use 2x1.5 V AAA batteries for this remote
control. Please insert the batteries to the remote control tightly. If it is not in use for
a long time, please take the batteries out of the remote control.
Note: Most functions of the appliance can only be controlled by remote control.
If you have lost the remotecontrol or if it is damaged, please contact our
customer service. The remote control should be pointed at the signal receiver on
the digital display to maximize the remote control signal. Effective distance: 4 m.
EN
19
