Gardena 1285 Instrucciones De Empleo página 9

3.5 To install the Irrigation Valve without
a Valve Box [ Fig. I5 ]:
CAUTION!
v When installing the Irrigation Valve
attention to the direction of flow (arrows)
to make sure it works properly.
1. Seal the screw connections with the GARDENA
PTFE sealing tape, Art. 7219.
Connecting GARDENA Connecting pipes
(2700 / 2701 / 2718) or other commercially avail-
able connecting pipes:
2. Screw the GARDENA Connectors
into the Irrigation Valve
3. Connect the GARDENA Connecting pipes
or other commercially available connecting pipes
(25 mm).
4 . OPERATION
4.1 To adjust the valve control [ Fig. O1 ]:
4.1.1 Fully Automatic Control:
Time-controlled irrigation with the GARDENA
Bluetooth App.
®
GAR_01285-63.960.02_2024-04-25.indb 9 GAR_01285-63.960.02_2024-04-25.indb 9
Flow direction!
(8) , pay
(9)
(10) Art. 2763
(8) .
(9)
3.6 To connect the Soil Moisture Sensor
(optional) [ Fig. I6 ]:
In addition to time-dependent control, it is also pos-
sible to include soil moisture.
If the soil moisture is sufficient, irrigation is stopped
or skipped.
1. Place the Soil Moisture Sensor
be irrigated.
(12)
2. Plug the connector
(8)
the Control Unit .
3.7 Conventional installation [ Fig. I7 ]:
If using Art. 2750 / 2751 / 2752 / 2753 / 2755 the
points marked with an arrow must be sealed with
sealing tape (e. g. Art. 7219).
An automatically opened valve can be closed
manually via the Man. Button on the valve or
in the App.
v Set the selection lever
(11) in the area to
into the sensor socket of
(13) to AUTO / OFF.
25.04.24 09:03 25.04.24 09:03
9