Safety Instructions - S&P CB-2005 Manual De Instalación. Instrucciones De Uso

ENGLISH
GENERAL
• The CB range of bathroom heaters have been manufactured to the rigorous
standards of production quality laid down by the International Quality Standards.
• All components have been checked and tested at the end of the manufacturing
process.
• Before any installation or connection we would advise that the following instruc-
tions are carefully read and then kept in an accessible area for future reference.
• All appliances are supplied in perfect condition and operation. However if found
to be defective the unit should be returned to the supplier in accordance with
ther terms of the S&P guaranttee.

SAFETY INSTRUCTIONS

• Make sure the power supply corresponds to the details shown on the
nameplate: 230 V ~ 50Hz.
• This product has been designed as a mobile heater or wall mounting.
It is designed as an auxiliary heat source and should be used only for
this purpose.
• Flammable objects (curtains, furniture, plants, etc. ) should not be
placed at less than 1 meter from the appliance.
• The heater must not be placed in a recessed place (under a table,
desk, ...) where it interferes with the free circulation of air, both the
inlet and outlet.
• The heater should not be placed immediately under a base of power
point.
• The heater cannot be connected to a programmer, timer or other de-
vice that controls the heater connection automatically.
• Do not install the heater on a plastic wall.
• Do not use the product in rooms filled with explosive gases or vapours
generated by solvents and paints or that are inflammable.
10