T.I.P. CHLOR COMFORT 15000 Traducción De Las Instrucciones De Uso Originales página 15

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Translation of original operating instructions
2. Technical data
Model
Mains voltage / frequency
Performance
Protection class (Pump)
Flow rate through filter
Max. Flowrate pump (Q
max
Max. pressure
Connection (pump)
Hose connector
Max. fluid temperature (T
max
Min. fluid temperature (T
min
Quantity of filter material (filter balls)
Length of power cord
Type of power cord
Weight of pump
Dimension of filter set
Total weight of filter set
Article No.
The values were determined with free, unreduced in- and outlet.
1)
3. Range of use
This pool filter system is designed for cleaning swimming pool water. The filter system may only be operated with
the supplied washable filter balls. The system must never be operated with filter sand.
The device has been developed for private use and not for industrial or commercial purposes.
4. Scope of delivery and optional accessories
This product includes:
A filter tank, a pump, connection and installation accessories, a small pack of filter balls, usage instructions.
Check the contents for completeness. If possible, keep the packaging until the end of the warranty period. Dis-
pose of packaging materials in an environmentally sound manner.
Depending on the application, additional accessories may be required. In our pool range, you will find other useful
accessories that simplify installation, improve maintenance and pool-cleaning.
5. Position and function
The pool filter system must be placed on a stable, level and solid base approx. 2 to 3 m from the edge of the pool.
Ensure that the ground will not subside, preventing any strain from the attached plumbing. Protect the set from
splash water and humidity. It should not be placed in an earth hole.
Make sure, the inlet of the pump is placed at least 30 cm under the water level of the swimming pool.
Please note the pump shall be placed on a well-ventilated and dry location, which is protected against float-
ing and splash water and easy to reach for maintenance. The pump shall not be placed into a too small cham-
ber or compartment in order to avoid overheating.
Make sure that all electric parts of the pump do not get in touch with water. Dangerous!
The pump is not suited to discharge saltwater, feces, inflammable, etching, explosive or other hazard-
ous liquids. Please observe the max. Temperature of the liquids to be discharged stated in the technical
data.
Operation of the pool filter system
The inflowing water is routed into the top part of the filter ball filling. Dirt and foreign objects in the filter bed are left
behind on their way through the filter ball filling. The filtered water returns to the pool from the bottom part of the
filter container via a discharge tube.
)
1)
)
)
Chlor Comfort 15000
230 V~ / 50 Hz
180 Watt (P1), 110 Watt (P2)
IPX8
3,500 l/h
4,500 l/h
0.45 bar
33.25 mm (1") male
32 mm (1¼"), 38 mm (1½")
40 °C
5 °C
350 g
1.6 m
H05RN-F 3G0,75 mm²
2.4 kg
49,3 x 34,5 x 50,4 cm
4.9 kg
30302
2
loading