Idiomas disponibles
Idiomas disponibles
Quick installation guide
Error / Display
the door does
not lock auto-
matically
Display of
locking status
incorrect
WLAN cannot
be connected /
is not displayed
in the app.
The system time
of the mobile
device and the
app does not
match
8 Technical specifications
8.1 Power supply (mounting on DIN rail)
Primary voltage:
Secondary voltage:
Current:
Power:
Dimensions (H x B x T):
Weight:
Installation:
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.com ∙ Subject to technical changes
blueMatic EAV4 / EAV4+
Possible cause
• the door is warped
• the contact pres-
sure is too high
• the door has not
been installed
properly
magnetic clip wi-
thout contact /not
correctly adjusted
The lock's connec-
tion to WLAN is
only available on a
device with WPA2
encryption.
Lock disconnected
from power for
min. approx.
30 minutes
100 - 240V AC; 50 / 60Hz
24V DC stabilized
2,5A
60W
90 x 53 (= 3 TE) x 58 mm
approx. 0,3 kg
mounting on DIN rail
Troubleshooting
• check the installation, and the keep
adjustment and alignment
• adjust the hinge plates
check whether magnetic clip is
present (maybe it has dropped out or
was not mounted at all),
check airgap adjustment (if it is too
large, magnet is not triggered)
If the router does not have the WPA2
security standard, the network is not
displayed.
Use WPA2 capable router.
Synchronization of system time
For the access times in the app to
function properly and securely, the
system time of the mobile device
must be synchronized with the app, so
answer the app message with "OK".
31
5095553
EN
7
8
