Idiomas disponibles
Idiomas disponibles
Quick installation guide
EN
1.5.1
Safety information regarding blueMatic EAV4+
1
For the correct use of blueMatic EAV4+ , please read the quick installation gui-
de carefully before putting the product into operation. Observe the information
given and follow the instructions described. Failure to comply with the notes
and instructions does not guarantee proper functioning of the product. Do not
disconnect the blueMatic EAV4+ system from the power supply during initial
installation or an update process. The resulting loss of data may entail the failure
of the device and requires it to be sent to the service partner. blueMatic EAV4+ is
intended for private use or use in small commercial units.
The locking system must generally be protected against moisture and manipu-
lation. Any use other than that described in these operating instructions is not in
accordance with the intended use and will result in disclaimer of warranty and
liability.
This also applies to modifications and alterations to the device. Don't open the
device under any circumstances! In the event of an error, contact the relevant
service department.
1.5.2 Safety instructions for smartphones (only EAV4+)
Make sure that your smartphone's virus scanner and firewall are always up to
date. This is the only way to protect yourself from attacks from the Internet. Re-
gularly check that your software is up to date and install the available updates.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.com ∙ Subject to technical changes
blueMatic EAV4 / EAV4+
Attention! Make sure to initialise the app! Unused QR code
contains access data and can be misused!
Notice: Always store the QR code securely – protected against
use / copying by unknown persons.
8
5095553
