Samsung WW1 B Serie Manual Del Usuario página 60

Troubleshooting
Problem
Leaks water.
Has odours.
No bubbles are seen
(Bubble models only).
Can I open the
AddWash door at any
time?
A message appears on
the display to alert that
dispenser is open.
If a problem persists, contact a service center. The number of the service center is on the label attached to
the product.
60 English
U-PJT_WASHER-MD_SimpleUX_DC68-04322L-00_EN.indd 60 U-PJT_WASHER-MD_SimpleUX_DC68-04322L-00_EN.indd 60
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and secured to
the drain system.
• Avoid overloading.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Check the drain hose.
- Make sure the end of the drain hose is not placed on the floor.
- Make sure the drain hose is not clogged.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitise periodically.
• Clean the door seal (diaphragm).
• Dry the washing machine interior after a cycle has finished.
• You may not be able to see bubbles if there is too much items in the drum.
• Severely contaminated laundry may not generate bubbles.
• The AddWash door can be opened only when the
However, it does not open in the following cases:
- When the boiling or drying process is running and the internal
temperature becomes high
- If you set the Child Lock for safety reasons
- When the drum wash or drum drying cycle that does not involve
additional laundry is running.
• Check if the detergent drawer is closed properly.
- Open the detergent drawer and close it again. Make sure it's closed
properly.
Action
indicator appears.
2024/1/2 11:48:26 2024/1/2 11:48:26