Samsung WW1 B Serie Manual Del Usuario página 23

D
NOTE
• After connecting the water hose to the adaptor, pull the water hose down to check if it is connected
properly.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the spacer ring before
inserting the tap into the adaptor.
For models with an additional hot water inlet:
U-PJT_WASHER-MD_SimpleUX_DC68-04322L-00_EN.indd 23 U-PJT_WASHER-MD_SimpleUX_DC68-04322L-00_EN.indd 23
6. While pulling down part (D) on the water hose,
connect the water hose to the adaptor. Then, release
part (D). The hose fits into the adaptor with a clicking
sound.
7. To complete connecting the water hose, see 2 and 3
on the "Connecting to a threaded water tap" section.
1. Connect the red end of the hot water hose to the hot
water inlet on the back of the machine.
2. Connect the other end of the hot water hose to the
hot water tap.
English 23
2024/1/2 11:48:17 2024/1/2 11:48:17