Idiomas disponibles
Idiomas disponibles
General Safety Warnings
WARNING: Failure to follow the warnings and instructions may result in damage to the tool
or serious injury.
Save all warnings and instructions for future reference.
WARNING: This tool is not intended for use by persons (including children) with reduced
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the tool by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
a) Familiarise yourself with the applications, limitations and hazards of the tool.
b) Keep the product in good working order and condition. Take immediate action to repair or
replace damaged parts.
c) Use recommended parts only. Unapproved parts may be dangerous and will invalidate the
warranty.
d) Use the tool only for its intended purpose.
e) Use appropriate safety equipment including eye protection, respiratory protection and protective
gloves.
f) Injury can occur if loose clothing, personal jewellery, neck wear, hair or gloves are not kept away
from the tool and its accessories.
g) Keep proper footing and balance at all times. If appropriate secure workpiece in a clamp or vice.
h) Ensure that the tool is disconnected from the air supply before servicing, changing accessories
and when not in use.
i) DO NOT allow smoking or open flames in the work area.
j) DO NOT modify the tool. Modifications can reduce the effectiveness of safety measures and
increase the risks to the user.
k) DO NOT tamper with or adjust safety valves or other safety features.
l) DO NOT use the tool or accessories if they have been damaged. Inspect tools and accessories
before each use. Do not use if damaged or excessively worn.
m) DO NOT use whilst tired or under the influence of drugs, alcohol or medication.
n) Compressed air can cause severe injury.
o) Whipping hoses can cause severe injury. Always check for damaged or loose hoses and fittings.
p) DO NOT direct air flow at yourself, others or animals.
q) DO NOT exceed the maximum air pressure stated on the tool.
r) Never carry an air tool by the hose.
s) Inspect tools and accessories before each use. Do not use if damaged or excessively worn.
t) Air tools should only be powered by compressed air at the lowest pressure required by the task to
reduce noise and vibration and minimise wear.
u) Hold the tool correctly; be ready to counteract normal or sudden movements such as recoil. Have
both hands available.
v) Never use pure oxygen or combustible gases to power an air tool. Air tools are not designed for
these power sources and their use creates a fire and explosion hazard.
w) Switch off tool if air / power supply is interrupted.
x) Be aware that air tools may become cold during use, affecting grip, control and susceptibility to
vibration-related injury.
IMPORTANT: Even when this tool is used as prescribed it is not possible to eliminate all residual risk
factors. If you are in any doubt as to the safe use of this tool, do not use it.
Work area hazards
a) Be aware of slippery surfaces caused by use of the tool and trip hazards caused by the air line.
Slips, trips and falls are major causes of injury.
b) Where possible do not obstruct thoroughfares and passageways with air lines or cables. Take
appropriate measures to reduce trip risk such as erecting warning signs and fixing cables and air
lines in place.
c) The tool is not intended for use in potentially explosive atmospheres and is not insulated against
contact with electric power.
Spray Gun Safety
WARNING: Solvents and paints are harmful and can even be toxic. Some solvents and paints
are extremely flammable. Handle with care, according to the manufacturer's recommendations.
Store solvents and paint in sealed, leak proof containers made of a material that is chemically
resistant to the specific solvent. Always wear suitable protective equipment and dispose of solvents
and paints, as well as contaminated items, as special waste, according to laws and regulations.
Air Tools & Compressor Accessories Kit 5pce
WARNING: DO NOT USE WITH HALOGENATED HYDROCARBONS. Solvents that are chemically
based on halogenated hydrocarbon, like trichloroethane and methylene chloride 1,1,1, may cause
chemical reactions in combination with aluminium and galvanised or hot galvanised components,
and may therefore represent a potential explosion hazard. Always refer to the manufacturer's
instructions.
WARNING: When spraying coating materials, dangerous vapours or aerosols, which are
detrimental to your health, are produced. Please read all labels and safety instructions carefully
and observe all indicated instructions and recommendations. In case of doubt, please ask the
material supplier. Use respiratory protection when spraying. The respiratory equipment used must
be suitable for the material in use and adapted to the degree of the vapour concentration. When
spraying paint, use respiratory equipment independent of the ambient atmosphere, or equipment
with filter combination A1/A2-P2. Ensure a sufficient protection of your skin during all spraying
and cleaning procedures. Wear appropriate protective clothes and use suitable protective skin
ointments.
WARNING: DO NOT spray acids, caustic solutions, removers and similar substances.
Air Tyre Inflator Safety Warnings
a) Refer to vehicle manufacturer's instructions before inflation.
b) DO NOT overinflate. Overinflation is dangerous and may pose a risk of tyre damage or explosion.
c) Check tyres for damage and excessive wear before inflation. Damaged tyres are weaker and may
pose a risk of explosion when inflated.
d) DO NOT inflate any tyre that has cracks, 'marbling' (black lines), bulging, soft spots or has
exposed steel cord.
e) DO NOT inflate any tyre that may have been run while being significantly underinflated.
Underinflation causes internal damage to the tyre that may not be visible.
f) Be mindful of traffic if inflating a tyre in an area where this may pose a hazard.
Product Familiarisation
1.
Canister
2.
Degreasing Gun Nozzle
3.
Degreasing Gun Trigger
4.
Fluid Connector
5.
Air Nozzle
6.
Material Nozzle
7.
Air Nozzle Locking Ring
8.
Knurled Pattern Adjustment Screw
9.
Knurled Needle Adjustment Screw
10. Trigger
11. Handle
12. Paint Container Lid
13. Paint Container
14. Air Hose
15. Quick Connector (EN-6)
16. Blow Gun Trigger
17. Valve Connector
18. Air Release Valve
19. Tyre Inflator Trigger
20. Pressure Gauge
silverlinetools.com
9
