Idiomas disponibles
Idiomas disponibles
1.
2.
3.
4.
Folding
All of the above steps must be performed in reverse order.
Si ng on the product
When using the AT51112 rollator to sit on it, strictly follow the precau ons on page one, in
par cular:
1. Make sure the parking brake is blocked.
2. Do not use the seat without the backrest folded to the correct posi on.
3. Do not use the seat if the rollator is on a sloped or uneven surface.
4. Do not exceed the maximum user weight.
5. Do not use the rollator as a wheelchair.
Checking and using the brakes
1. Before using the rollator, always make sure that the brakes are fully func onal.
2. Check the opera on of the brakes by pulling up the brake levers as shown in Fig. 3 - the
rollator should not move.
3. To block the parking brake, push the brake levers down. An audible click means the brake is
in the correct posi on - the rollator should not move (see Fig. 4). Note that both levers must
be in down posi on when using the parking brake. To release the parking brake, the levers
must be moved up.
4. If the rear wheels of the rollator con nue to move a er blocking the parking brake or
pulling up on the brake lever while walking, stop using the rollator immediately. It must not
be used un l the brakes have been checked and adjusted. See maintenance sec on.
3
4
AT51112_ins_multi A6_2.indd 10
2023-10-15 21:29:52
