Idiomas disponibles
Idiomas disponibles
ENGLISH
-
Normal: in this mode, the fan will operate at constant speed. When selecting this mode,
the
indicator light will light up.
-
Natural: in this mode, the fan will switch on and off to simulate natural breeze. When
selecting this mode, the
-
Sleep: in this mode, the fan will simulate a soft, gentle breeze, so you can use it while you
sleep. When selecting this mode, the
lights will switch off after a few seconds.
5. Press the oscillation button to activate the oscillation function. Press this button again to
deactivate the function.
6. Press the timer button to activate the timer. This function allows you to programme the fan
to automatically switch off after a set time. Each time you press this button, the running
time of the fan will increase by half an hour (the maximum time you can select is 12 hours).
Temperature
The display will show the room temperature.
Battery substitution
If you need to change the battery in the remote control, do so as follows:
1. Push the tab to the side and pull out the battery compartment.
2. Remove the battery and replace it with one of the same type, paying attention to the
polarity.
3. Place the battery slot back on the remote control.
5. CLEANING AND MAINTENANCE
Repairs should only be carried out by qualified personnel.
Before cleaning the fan surface, make sure that the fan is switched off and disconnected from
the mains.
Use a soft cloth to clean it. To remove stubborn dirt, you can wipe it off with a cloth dampened
with warm, soapy water.
Do not use solvents, as they may damage the plastic housing.
You can remove the rotor for cleaning. Follow the indications on Figure 4.
6. TECHNICAL SPECIFICATIONS
Product reference: 08351
Product: EnergySilence 9090 Skyline Smart
42
ENERGYSILENCE 9090 SKYLINE SMART
indicator light will light up.
indicator light will light up. All other indicator
