Product Specifications - DeWalt DXF1645 Traducido De Las Instrucciones Originales

English

PRODUCT SPECIFICATIONS

Model DXF1645
Power 220-240V~ / 50Hz / 110W
Speed 3
Weight 7.32 kgs
Power cord H05VV-F, 3C × 0.75mm² 1.8m
WARNING:
As with all electrical appliances, basic safety
precautions should always be followed to reduce
the risk of electric shock, re, or injury to persons,
including the following precautions:
Read all the instructions before using this fan.
WARNING:
• Use this fan only as described in this manual.
Any other use not recommended by the
manufacturer may cause electric shock, re
or injury to persons.
• Do not operate the fan with a damaged power
cord or after the fan malfunctions or has been
dropped in any manner.
• Use of extreme caution is necessary when any
fan is used by or near children, disabled
persons or pets and whenever the fan is left
operating unattended.
• Do not place the fan on a small, unlevel, uneven
or any surface which might allow fan to tip or fall.
• For proper operation, fan should be placed on
a smooth non-combustible, level surface.
• Always unplug fan when not in use, when moving
from place to place, when assembling or
disassembling parts, and before cleaning.
• The use of attachments that are not
recommended or sold by the manufacturer may
cause hazards.
• Do not use outdoors.
• Do not use fan in window. Rain may cause
electrical hazard.
• Do not operate any fan with a damaged cord
or plug. Discard fan or return to an authorized
service facility for examination and/or repair.
• Do not run power cord under carpet. Do not
cover cord with throw rugs, runners or the like.
Arrange cord away from traf c area where it
will not be tripped over.
• Do not insert or allow any object to enter any
openings on the fan. Doing so may cause
electric shock and/or re hazard. Avoid
contact with moving parts.
READ&SAVE THESE INSTRUCTIONS
WARNING: Shock Hazard
Use your fan only in dry environments. This fan is not
intended for use in a bathroom, laundry area, or similar
locations, or near sinks, washing machines, swimming
pools or other sources of water. Never locate fan
where it may fall into a bathtub or other water
receptacle. Do not use in damp environments such
as ooded basements.
WARNING: Hot Surfaces
Do not touch fan motor when in use. This motor is hot
when in use, to avoid burns, do not let bare skin touch
hot surfaces.
WARNING: Fire Hazard
Fans have arcing or sparking parts inside. Do not use
near combustible materials or ammable gases or
sources of heat. DO NOT USE in areas where gasoline,
paint or ammable materials are used or stored. To
prevent a possible re, do not block air intakes or
exhaust in any manner. Do not insert or allow foreign
objects to enter any ventilation or exhaust opening as
this may cause an electric shock, re, or damage the
fan.
WARNING: Electrical Shock Hazard
Do not use with damaged cord or plug. Use with
adequate electrical system that is up to code.
WARNING: To Prevent Electric Shock
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock, check
with a quali ed electrician or service person if you are in
doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the appliance-if it
will not t the outlet, have a proper outlet installed by a
quali ed electrician.
WARNING: To Reduce The Risk Of
Electric Shock
Do not use this product with any solid-state speed
control device.
FAN OPERATION
WARNING:
Before assembling the fan, make sure
all parts are present. Compare parts with contents list.
If any part is missing or damaged, do not attempt to
assemble, install, or operate the product. Contact
customer service for replacement parts. Unplug
fan before assembling any parts to it.
Tools Required (Not Included):
1.
#2 Phillips Screwdriver or Suitable Drill Equipped with
#2 Phillips Bit.
2.Fan Cradle Assembly:
required to use this fan as shown in Fig. A.
3
Simple assembly is