Federal Signal Corporation AudioMaster AM300X-R Instrucciones Para La Instalación Y El Mantenimiento página 4

Altavoz a prueba de explosiones
Idiomas disponibles

Idiomas disponibles

I.
GENERAL.
The AudioMaster Model AM300X is a 25 Vrms and 70 Vrms, indoor/outdoor rated,
selectable power output (1, 2, 7, or 15 watts), hazardous location loudspeaker for use
with fire alarm and general signaling systems such as Federal Signal's SelecTone
system. This model is suitable for use in areas with high ambient noise levels. It is
designed to reproduce electronically generated warning tones, which command rapid
recognition, and full range voice communication. An adjustable mounting bracket is
provided to allow positioning for desired sound coverage.
II.
SPECIFICATIONS.
Operating Voltage:
Power Input (selectable):
Maximum Supervisory Voltage:
Weight (approx.):
Size:
Construction: Aluminum enclosure and adjustable steel mounting bracket with a
powder coat finish
Frequency Response
Voice:
Tone:
Approval Agency Listings:
Audibility information is shown in Table 1.
III. INSTALLATION.
A. Unpacking.
After unpacking the speaker, examine it carefully for possible damage that
may have occurred in transit. If equipment has been damaged, immediately file a claim
with the carrier stating the extent of the damage. Carefully check all shipping labels
and tags for special instructions before removing or destroying them.
B.
Mounting Arrangements.
The speaker can be mounted on any relatively flat surface capable of support-
ing the speaker's weight. Conduit connections can be made to the 1/2" NPT threaded
openings at bottom of the housing (see figure 2).
Property damage, serious injury, or death could occur if an accumulation of
water, snow, dust, etc. resides in the speaker projector, severely reducing or
preventing operation of this device. Mount the unit so speaker projector is
pointed horizontally or slightly downward.
1. Remove the two 1/2"-13 hex head bolts, flat washers and lockwashers
that secure the mounting bracket to the unit. Disconnect the lanyard from the mount-
ing bracket at the cotter ring.
2.
Select a mounting location.
16.3" (414mm) long , 17.0" (432mm) high, 13.1" (333mm) wide
25Vrms or 70Vrms
1W, 2W, 7W, and 15W
50VDC
15.7 lbs. (7.1 kg)
800 - 3150Hz
400 - 4000Hz
Reference product nameplate
-2-
loading

Este manual también es adecuado para:

Audiomaster am300xAudiomaster am302x-r