Idiomas disponibles
Idiomas disponibles
Left open
Change the lock body direction
Attention: the lock comes from the factory prepared for assembly for the door opening on
the right side.
When installing the lock, the opening latch (1) is located at the top and the locking latch (2) is
located at the bottom. The inclined/oblique part of the opening latch is directed towards the
door frame (closing).
1. To change the opening direction of the door, you must change the opening direction
of the door, i.e. you must turn the opening latch (1) by 180 degrees.
2. Unlock the locking pin (3) on the lock, push the opening latch (1) inward below the
level of the faceplate (4) and rotate it 180 degrees.
3. Lock back the locking pin on the lock.
4. Change the position of the handle according to the sketch (0) from left to right. Loosen
the left locking screw, rotate the handle 180 degrees and tighten the screw in the new
position.
The lock now allows mounting the latch on a left-hand opening door (opening the door to the
outside).
Right open
4
