Idiomas disponibles
Idiomas disponibles
• Once they stop blinking, the coffee machine will enter the
heated position and will be ready to brew your preferred
coffee.
MAKING ONE COFFEE
• Follow the steps indicated before, according to one cup of
powdered coffee filling.
• Once the filter holder is in its place, press the 1-cup
button.
• The coffee machine will stop automatically once the
coffee is brewed.
MAKING TWO COFFEES
• Follow the steps indicated before, according to two cups
of powdered coffee filling.
• Once the filter holder is in its place, press the 2-cups
button.
• The coffee machine will stop automatically once both
coffees are brewed.
HOT WATER
• From the heated position, place a cup under the steam
pipe.
• Open the steam knob turning it anticlockwise. Hot water
will start coming out.
• To end, close the water system by turning the knob in
reverse.
MILK FROTHING
• From the heated position, press the steam button. It will
start blinking.
• Once the button stops blinking, the machine will be ready
to make dry steam.
• Place a cup with milk under the steam pipe and introduce
the steam pipe until the outlet is nearly at the bottom of
the cup.
• Open the steam knob turning it anticlockwise. The noise
of the steam coming out will be heard.
• Adjust the temperature by touching the cup, and when
you see it ready, close the steam knob.
• NOTE: After steaming, if you want to return to coffee
extraction, press the steam heating button and lower the
pressure, following the steps in the "Hot water" section
of this manual. Releasing some water will lower the
temperature and relieve the pressure.
SETTING UP THE COFFEE QUANTITY
• You can set the duration for the two electronic functions of
this coffee maker (make one coffee or two coffees).
• To do this, prepare the machine according to the function
you wish to set up.
• Press the button of the function you wish to set up for 3
seconds.
• You will see that the other buttons stop illuminating.
• Remember to place a cup under the filter holder.
• Press the button again to start the setting.
• When you reach the desired duration, press again to
record the amount.
STAND-BY FUNCTION
• In order to save energy, the appliance passes to stand-by
after 25 minutes if the user does not use it.
• When the appliance enters the stand-by function, the On/
Off button will keep blinking slowly.
• If you want to restart the machine, you can press any of
the three buttons.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off using the On/Off button. Unplug the
appliance from the mains.
• Let the appliance cool down.
• Clean the appliance.
SAFETY THERMAL PROTECTOR
• The appliance has a safety device which protects the
appliance from overheating.
• When the appliance switches itself on and off repeatedly,
for reasons other than the thermostat control, check to
ensure that there are no obstacles that impede correct air
entry or expulsion.
• If the appliance turns itself off and does not switch itself
on again, disconnect it from the mains supply and wait
for approximately 15 minutes before reconnecting. If the
machine does not start again, seek authorised technical
assistance.
