Idiomas disponibles
Idiomas disponibles
• Owners or users of electrical and electronic devices
are legally obliged to return them after use.
• The end user is responsible for deleting their per-
sonal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that
waste electrical and electronic equipment must not
be disposed of with household waste.
• Waste electrical and electronic equipment can be
handed in free of charge at the following places:
- Public disposal or collection points (e.g. municipal
works yards).
- Points of sale of electrical appliances (stationary
and online), provided that dealers are obliged to
take them back or offer to do so voluntarily.
- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
17. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your product failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Possible cause
The sprayer is not plugged in.
The socket is not outputting
power.
The sprayer
does not start.
The extension cable is damaged
or its capacity is too low.
The sprayer has switched off
under pressure.
The variable nozzle is clogged.
The suction hose is clogged.
The pressure control is set too
No (or very
low.
little) spraying
material is
The suction hose is not tight
sprayed.
enough.
The suction hose mesh filter is
clogged.
- For additional take-back conditions of the man-
ufacturers and distributors, please contact the
respective customer service.
• In the case of delivery of a new electrical device by
the manufacturer to a private household, the latter
may arrange for the free collection of the old elec-
trical device upon request from the end-user. Get in
contact with the manufacturer's customer service.
• These statements only apply to devices installed
and sold in the countries of the European Union
and which are subject to the European Directive
2012/19/EU. Different provisions may apply to the
disposal of electrical and electronic appliances in
countries outside the European Union.
Remedy
Plug in the sprayer.
Check the precise mains voltage.
Exchange the extension cable or replace it with a cable of a
suitable voltage.
The motor switches on and off during spraying to regulate
the pressure. This is a normal process.
Clean the variable nozzle with the help of a cleaning
needle.
Clean the suction hose.
Set the pressure control higher by turning the dial
clockwise.
Readjust the suction hose on the suction hose inlet
connection and fix the screw on the metal hose clamp
for the suction hose inlet connection with a flat-blade
screwdriver.
Clean or replace it. Only use cleaning solution suitable for
the material.
www.scheppach.com
GB | 37
