Idiomas disponibles
Idiomas disponibles
Recommended E arthing
Method
EARTHING
iNSTRUCTiONS
This washer must be earthed. In the event of a malfunction
or breakdown, earthing will reduce the risk of electric
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-earthing
conductor and an earthing plug. The
plug must be plugged into an appropriate outlet that is
properly installed and earthed in accordance with all local
codes and ordinances.
WARNING:
Improper connection of the equipment-
earthing conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly earthed.
Do not modify the plug provided with the appliance - if it wilt
not fit the outlet, have a proper outlet installed by a qualified
electrician.
INSTALLATION INSTRUCTIONS
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. Remove tape that covers the shipping strap. Pull to
completely
remove the shipping strap with 2 cotter pins
from the inside of the washer.
A
B
A. Shipping tape
B. Shipping strap
2. Pull firmly to remove the end of shipping strap from the back
of the washer. The shipping strap plug must be completely
removed from the washer for the self-leveling legs to be
released.
Save the shipping strap for later use.
Proper connection
of the drain hose avoids damage to your
floors due to water leakage. Read and follow these instructions.
Connect
the inlet hose
1. The washer must be connected to the water taps using the
new inlet hoses supplied with the washer. Do not re-use old
hoses. Insert new flat washers (supplied) into each end of the
inlet hoses. Firmly seat the washers in the couplings.
B
A
A. Coupling
B. Washer
6
