English - Quick Start Guide - Simogas EXTREME-75 ACIER Guía Rápida De Utilización

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
You just bought a Simogas Griddle and this is why we want first of all, to thank you for the trust you have placed in us, cer-
tainly we will not disappoint you. We will give you a few tips to get the most out of your new Spanish Griddle Simogas.
1.
Open the carton and check that it contains: The griddle with its data plate, lighter or piezoelectric, instruction manual,
4 feet for the griddle, 1 or 2 injectors for natural gas (according to the number of burners). Now
plastic that protects the stainless steel parts.
Install the griddle on a flat, fireproof surface or on the corresponding Simogas Trolley.
2.
level the griddle. In case of using the Simogas wooden trolley, place the griddle on a flat, level surface. If necessary,
introduce some washers between the trolley and the griddle, so that this is level.
Connect the gas pipe
3.
leak. Refer to specific regulations for your city or country, since it is possible that the connection should be made by a
qualified installer.
4.
How to turn the griddle on.
the gas valve if the burner is not turned on or is turned off. To turn on the griddle, press the valve black button and
turn it to the left at maximum power. Holding down the button, press the piezoelectric ignitor to cause a spark and
the burner ignition (for models with piezoelectric). If the model does not have a piezoelectric ignition, turn on the
lighter and keep it close to the burner. Once the burner is lit, hold the throttle for a few seconds and then release. If
the burner goes out, repeat the operation holding the knob down for a few seconds.
Let the griddle heat
5.
sary for proper cooking on the grill. This temperature allows food (especially meat) cicatrize quickly in contact with
the griddle, and thus retain all its juices and flavours.
6.
Cleaning the rolled carbon steel plate and the compressed steel carbon-hardened plate:
While the griddle is still hot, pour some ice cubes over the plate. This will help remove food debris stuck to it. Remo-
ve with a spatula the loose food debris. When you have finished cleaning the plate, spread a thin layer of oil onto the
surface to protect from oxidation. Namely the provisory food coating begins to disappear from first use. Avoid using
lemon, vinegar or other acid (food or non food), because it accelerates the disappearance of the coating.
Cleaning the enamelled cast iron plate:
7.
does not resist any thermal shocks through it.
Use water at room temperature, which will help cleaning food scraps. Remove the food debris with a spatula. Finish it
with non-abrasive detergents . It is not necessary to spread oil onto the surface.
Avoid using lemon, vinegar or other acid (food or non food), because it attacks the appearance of the enamelled iron plate.
8.
Cleaning the hard chrome plate:
griddle is still hot. Remove it with a spatula. Avoid using lemon, vinegar or other acid (food or non food), because it
attacks the appearance of hard chrome.
9.
If the griddle (no enamel) shows signs of rust, scrape the rust with a pumice stone or use fine-grit sandpaper, or with
a rust remover for food use. Clean and rinse the plate before use to prevent any remaining traces of detergents, rust,
pumice, or other components.
This equipment must be installed in compliance with current regulations and must only be used in places with sufficient ven-
tilation. Consult instructions before installation and use of this equipment.
This installation, use and maintenance manual must be read before performing any operation with the equipment.
It is recommended that this manual be kept in a location that is visible and accessible to the user for future consultations.
It is recommended that the condition of the equipment be checked before its installation and verified that it has not suffered
any damage during transport.
The manufacturer is not responsible if the equipment is installed without following the installation instructions.
The manufacturer is not responsible for operation of the equipment if the user does not follow the suggestions for use of the
instruction manual.
The manufacturer is not responsible for malfunctions due to incorrect use of the equipment.
Parts that have been protected by the manufacturer and its agent MUST NOT be handled by the installer and user.
The manufacturer is not responsible for any manipulation of the equipment by the user.
ENGLISH
QUICK START GUIDE
SIMOGAS GRIDDLE
(not supplied) to the gas inlet located on one side of the griddle. Make sure that there is no gas
The griddle is equipped with safety Thermocouple that ensures no gas leaks, as it closes
for 5 to 10 minutes at full power. This is the required time to reach 300 º C temperature, neces-
Avoid large temperature contrasts. Do not use ice cubes, because enamel
To remove food debris stuck to the plate, pour some ice cubes over it, when the
25
remove the white
Use the adjustable feet to
EN
Tabla de contenido
loading

Tabla de contenido