Donner HUSH-I PRO Manual De Usuario página 8

Panel Function Illustration
①
Display screen: It displays current status.
②
EDIT: The rotary knob is used to select mode or choosing the effect type of the current preset tone.
③
SELECT: The rotary knob is used to select current function mode on the display screen or regulate function parameters. (The
knob is invalid in the BYPASS mode)
④
VALUE: The rotary knob is used to regulate the function parameters or volume . (The knob is invalid in some situations)
⑤
MASTER: The master volume knob is used to control the ultimate output volume in all cases.
⑥
AIR BOOST: It is used to regulate the master air value (low frequency compensation) of all preset outputs; it is invalid in the
BYPASS mode.
⑦
TONE BOOST: It is used to regulate the master brightness value (high frequency compensation) of all preset outputs; it is
invalid in the BYPASS mode.
⑧
SAVE: Press the button once to select the preset location and volume of preset, and press it again to confirm the storage.
⑨ Bluetooth button (Bluetooth indicator): • Long press the button to turn on/off Bluetooth; • Shortly press it to reset the
parameters or volume of current function. (The button is invalid in some situations);
Bluetooth indicator: • The off status indicates that it is turned off; • The flickering status indicates that it is not connected;
• The solid status shows that it is connected.
⑩
Power switch
⑪
Phone output
⑫
Charge indicator
⑬
USB port: It is used for power supply/charging/host connection/OTG connection.
OPERATION
The following operation guide allows you to enjoy the powerful sound and flexible control of the Built-in effect of HUSH-I PRO
quickly and safely!
Connection
Cautions: There are several different connections options available with the HUSH-I PRO.
1. Before connecting the HUSH-I PRO, make sure that the volume knobs of MASTER are turned to the minimum.
⑥
① ②
⑦ ⑧ ⑨
③ ④
5
⑩ ⑪
⑤ ⑬
⑫