Sorting Or Determination Of Conductors Already Installed - Amprobe AT-2032 Manual De Instrucciones

Sorting or determination of conductors already installed

EXAMPLE 13 (dual-pole application)
Tracing depth approx. 40 cm
Requirements:
1) Any exisiting circuits within the cable must be voltage-free.
2) The lead terminals must be twisted and electrically connected between each other.
3) You need several transmitters, with different transmitter signals (A to F or 0 to 9).
4) Connect the transmitter according to figure.
5) Carry out this example as described in the application example
For this application example, please pay attention that the stripped lead terminals are twisted
which each orther. The electrical connection between the stripped lead terminals must be
good.
In case only one transmitter is available, the sorting of the sheathed cables can be carried out
by sequentially reconnection the transmitter.
28