CPS Leak-Seeker II Operación Manual página 4

GENERAL INFORMATION
Leak-Seeker
®
detector with E_MOS
algorithms control the operation of this instrument allowing the
user to quickly find the location of both small and large leaks with
pin-point accuracy. Efficient control of the power to the sensor
increases the life of the batteries while ensuring that the sensor
is operated within its optimum parameters. A wide range audible
alarm and 56 levels of sensitivity, automatically selected by the
POWERSHIFT™ software and displayed in a bar graph type visual
indicator, lets the user concentrate on finding the leaks and not on
the instrument. Housed in an ergonomically shaped high impact
plastic chassis with a flexible 15" probe, the Leak-Seeker
built for rugged field use. The E_MOS
metal cage designed to protect the sensor from dirt and water.
The sensor housing incorporates an easily removable threaded
cap with a filter, allowing the user to easily clean any dirt or grease
which may collect while searching for leaks.
Features:
• Microprocessor controlled sensor electronics utilizing a multi
channel signal detection method, improves sensitivity while
reducing false alarms.
• New E_MOS
pulse modulation design to increase both battery and sensor
life.
• Software managed sensor rejuvenation mode, automatically
initiated at each startup ensures the highest level of sensitivity
every use, for up to 500 hours of detecting leaks of less than
.1 oz per year.
• Sensitivity remains constant over the life of the sensor.
• Dynamic signal analysis and automatic sensitivity control,
enables the
regardless of its size or the refrigerant type...without operator
intervention.
• The world's only leak detector with fully automatic sensitivity
selection and control.
• Senses all refrigerants including those with hydrocarbon
components.
• Meets or exceeds all U.S. and International standards
for commercial use.
• Superior sensitivity to R-410A and new HFO refrigerants.
• Sensor not contaminated by R-404a.
• Sensitivity to 35 parts per million (less than .1 oz per year).
• 50 hour battery life (3) "C" batteries.
• 500 hour sensor life.
• 2 year warranty.
• Patented.
Leak-Seeker
II is the world's only fully automatic electronic leak
sensor technology. Sophisticated software
®
sensor technology incorporates a proprietary
®
Leak-Seeker
®
II Overview
®
sensor is enclosed in a
®
to make quick work of any leak
II
4
II is
®