Idiomas disponibles
Idiomas disponibles
User's Manual
Fixing screws of compressor or
condenser are loose
Compressor or fan defective
Condenser
The plug of starter or heat relay is
fan is
working, but
the
Compressor defective
compressor
doesn't
Voltage is lower than 97V or higher
operate
Evaporator
Fan switch defective
fan
Not running
Fan switch terminal is not connected
Notice: The following are not trouble but common phenomenon:
1. Sound, the refrigerant flows inside the chiller.
2. Compressor and condenser become hot.
3. If the ambient humidity is high, there may be dewdrop on the surface, please use soft and dry
cloth to clean in time.
Screws fixed tightly or
Check the Compressor
Check the starter and
loose
than 130V
Check the circuit of the
properly
not
Ask help of professional
or fan
Install the starter or
heat relay
Check the resistance
of compressor CSM
Change new compressor
terminal
Check the input
Use a voltage stabilizer
Voltage
Check the resistance
of switch
terminal or change a
fan switch
10
Ask professional to
Tighten the screws
to repair.
Ask professional to
heat relay
Ask professional to
Change the switch
Ask professional to
Connect the switch
new terminal
maintain.
Ask help of
professional to
repair.
maintain.
maintain.
maintain
