Idiomas disponibles
Idiomas disponibles
BEFORE USING FOR THE FIRST TIME
1. Remove all of the various packaging, stickers or accessories from both the inside and outside of
the kettle.
2. Adjust the length of the cord by winding it under the base. Wedge the cord into the notch.
Throw away the water from the first two/three uses as it may contain dust. Rinse the kettle and
the filter separately.
USE
1. TO OPEN THE LID
– Automatic opening lid: press the button at the top of the handle.
To close the lid, press it down firmly.
2. PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY FROM WATER
SPLASHES AND ANY SOURCES OF HEAT.
• Your kettle must only be used with the base that matches it and its own anti-scale filter.
3. FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER.
• Never fill the kettle when it is on its base.
• Do not fill it above the maximum level, or below the minimum level. If the kettle is too full,
boiling water may spill out.
• Do not use without water.
• Check that the lid is closed properly before use.
4. POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS SOCKET.
5. TO START THE KETTLE
Press the on/off button positioned on the bottom of the handle.
6. THE KETTLE WILL SWITCH OFF AUTOMATICALLY
as soon as the water reaches boiling point. You can stop it manually, before removing it from its base
to pour the water. The indicator light will go out when the water reaches boiling point. Make sure
that the on/off button is in the off position after boiling and that the kettle has switched off before
removing it from its base.
• Do not leave water in the kettle after use as this quickens the formation of scale.
CLEANING AND MAINTENANCE
CLEANING YOUR KETTLE
Unplug it.
Let it cool down and clean it with a damp sponge.
• Never immerse the kettle, its base, the cord or the electric plug in water or any other liquid: the
electrical connections or the switch must not come into contact with water or any other liquid.
• Do not use scouring pads.
DE-SCALING
De-scale regularly, preferably at least once a month or more frequently if your water is very hard.
To de-scale your kettle:
• Using white vinegar:
– Fill the kettle with ½ l of vinegar,
– Leave to stand for 1 hour without heating.
(fig 2)
(fig 3)
(fig 4)
68
(fig 1)
MS
