Idiomas disponibles
Idiomas disponibles
6. To change the code, either (For models with 2 push buttons, change code
setting in both push buttons to match chime.):
• Set a dip switch in the chime and the matching dip switch in the push
button to "ON" or...
• Set a dip switch in the chime and the matching dip switch in the push
button to "OFF" or...
• Set a dip switch in the chime and the matching dip switch in the push
button to "OFF". Set a different dip switch in the chime and the matching
dip switch in the push button to "ON".
Example: Move dip switches at location "5" to "OFF" and at location "4" to
"ON" on both the push button and the chime.
Note: Code positions 1 through 7 must be exactly the same for both the
push button and chime for this system to function.
Note: Unit will come factory set with dip switch locations 5, 6, and 7 in the "ON"
position (see Figure 6).
7. Replace code setting access door removed in step 3. Gently tighten screw.
The range of the wireless chime can vary with location, temperature, and bat-
tery condition.
200203-01
-5-
