Idiomas disponibles
Idiomas disponibles
Figure 2
Figure 3
4. Mount chime. attach chime unit to rectangu-
lar electrical box using two screws provided.
• Insert screws into screw holes as shown in
Figure 2. Note: chime can only be mounted
in vertical position. Use arrow on rear of
chime unit as a guide.
• Turn on household power.
5. Mount push button. Use either screws or
double sided tape to mount push button.
• Screw Mounting: To mount with screws,
remove back of case by pushing in tab on
bottom with a small screwdriver (see Figure
1). Note: Remove material in screw holes
(if needed) before mounting with screws.
Attach back of case to door jamb or wall (see
Figure 3). Snap front of push button on.
• Tape Mounting: When attaching push but-
ton using double sided tape, make sure the
surface of the door jamb or wall is clean.
-2-
200203-01
